SIMMS M'S G3 GUIDE STOCKINGFOOT WADER
The Simms G3 Guide waders are back with improved fit and features!
- FREE SHIPPING OVER $50
- EASY RETURNS
- SECURE SHOPPING
- More information? Contact us about this product
- Add to comparison list
Simms' long-standing, award-winning wader is back with an exciting update to the material package, improved fit, and an enhanced feature set while remaining the most comfortable, reliable, and performance-driven wader ever.
- Updated material lamination package with even more durable, breathable, and comfortable Gore-Tex 3-layer upper and Gore-Tex Pro 4-layer lower
- Adjustable spacer air-mesh suspender system with a fabric suspender divider and integrated webbing attach point for net carry
- Top access zippered stretch pocket plus zippered, reach-through micro-fleece lined hand-warming chest pocket
- The upper organization also includes a removable Tippet-Tender Pocket and a zippered stretch-woven interior flank pocket on wearer's left
- Built-in low-profile back belt loops with high and low options; 2 inch stretch nylon belt included
- Patented front and back leg seams deliver articulated fit, improved mobility, and increased durability
- Patented, abrasion-resistant, built-in Gravel Guards
- Anatomically engineered neoprene stockingfeet with anti-microbial finish
- Custom options available
FABRIC TECH: Upper: 3-layer waterproof, breathable Gore-Tex Shell; Lower: 4-Layer waterproof, breathable Gore-Tex Pro Shell
ITEM #: PG-13476
WADER CARE
- SIMMS waders are all built from a durable breathable fabric. Whether that is GORE-TEX® or Toray®, the care that should be taken is the same.
- Waders should be dried after each use, both inside and out. Simms understands that certain situations do not allow for time to fully dry between uses. It is the expectation that this circumstance will contribute to a potential shorter lifespan.
- Breathable fabrics are porous in nature and can collect dirt, oils from the skin and other environmental substances. Regular cleaning of waders is a key contributor to their lifespan.
- Depending on the amount of days used, annual, bi-annual or tri-annual washing is recommended.
- Exposure to salt water or salt air requires special care: The waders must be rinsed thoroughly with fresh water and dried after each use.
WARRANTY AND REPAIRS
If your SIMMS product fails due to a defect in workmanship or materials, SIMMS will repair or replace your gear and get you back on the water as soon as possible. If your SIMMS product fails due to excessive wear, accidents involving barbed wire or campfires, or the natural breakdown of materials over extended time, SIMMS will make every effort to repair your gear for a reasonable fee.
WADER WARRANTY DETAILS
-
60-DAYS – WADERS - REPLACEMENT FOR LEAKS, NO QUESTIONS ASKED
-
365-DAYS – WADERS – REPAIRS ON US
-
If purchased directly from SIMMS, visit our Repairs page to begin your request (located via the "Help" menu in the footer menu).
-
You are responsible for charges related to shipping the wader to SIMMS. SIMMS will cover return shipping of the wader back to you.
-
If purchased from an authorized SIMMS dealer in North America, you may return your waders to that dealer for repair. You must provide the original sales receipt or proof of purchase to the authorized dealer.
-
If purchased outside the US and Canada, please consult the dealer where your product was purchased to confirm international warranty terms in your territory.
WADER REPAIRS BEYOND THE FIRST YEAR - $60
- If your wader is in need of repair after your first year, Simms charges a flat fee of $60 for evaluation, repair, testing of repairs and return shipping back to you. To initiate a repair, please contact the authorized Simms Dealer where your wader was purchased, or you may use the Simms Online Repair Center and return the waders to Simms.
- Turnaround time for any repair or warranty claim is roughly 3 weeks, not including transit time to and from Simms. Turnaround time may vary depending on seasonal volume.
- Wader repair in Bozeman, Montana, is available only to customers based in U.S. and Canada
Waders Size & Fit Guide
How to measure for waders
Men's Stockingfoot Wader Size Chart
For sizing help, please watch How To Find Your Wader Size on the Fit Guide tab above.
3 Inseams Available: Short, Regular and Long
Short Inseam
Simms Wader Size | Inseam* | Largest Girth** (chest, waist or hips) |
Stockingfoot size |
M 9-11 | 31" - 32" | 39" - 40" | 9 - 11 |
M King 9-11 | 31" - 32" | 41" - 42" | 9 - 11 |
L 9-11 | 31" - 32" | 43" - 44" | 9 - 11 |
L King 9-11 | 31" - 32" | 45" - 46" | 9 - 11 |
XL 9-11 | 33" - 34" | 47" - 48" | 9 - 11 |
Made-to-order Short Inseam Custom Sizes - GORE-TEX® Waders Only. Upcharges apply. | |||
2XL 12-13*** | 33" - 34" | 51" - 52" | 12 - 13 |
3XL 12-13*** | 33" - 34" | 55" - 56" | 12 - 13 |
NOTE: Sizes available vary by wader model.
*Crotch to floor - see Fit Tab
**Body measurements
***Available through our Custom Shop - please call (888) 585-3570
Regular Inseam
Simms Wader Size | Inseam* | Largest Girth** (chest, waist or hips) |
Stockingfoot size |
S 7-8 | 31" - 32" | 35" - 36" | 7 - 8 |
S King 7-8 | 31" - 32" | 37" - 38" | 7 - 8 |
M 9-11 | 33" - 34" | 39" - 40" | 9 - 11 |
M King 9-11 | 33" - 34" | 41" - 42" | 9 - 11 |
L 9-11 | 33" - 34" | 43" - 44" | 9 - 11 |
L 12-13 | 33" - 34" | 43" - 44" | 12 - 13 |
L King 9-11 | 33" - 34" | 45" - 46" | 9 - 11 |
XL 12-13 | 35" - 36" | 47" - 48" | 12 - 13 |
XL King 12-13 | 35" - 36" | 49" - 50" | 12 - 13 |
2XL 12-13 | 35" - 36" | 51" - 52" | 12 - 13 |
Made-to-order Long Inseam Custom Sizes - GORE-TEX® Waders Only. Upcharges apply. | |||
2XL King 12-13*** | 35" - 36" | 53" - 54" | 12 - 13 |
3XL 12-13*** | 35" - 36" | 55" - 56" | 12 - 13 |
4XL 12-13*** | 35" - 36" | 59" - 60" | 12 - 13 |
NOTE: Sizes available vary by wader model.
*Crotch to floor - see Fit Tab
**Body measurements
***Available through our Custom Shop - please call (888) 585-3570
Long Inseam
Simms Wader Size | Inseam* | Largest Girth** (chest, waist or hips) |
Stockingfoot size |
Medium 9-11 | 35” - 36” | 39" - 40" | 9 - 11 |
Large 9-11 | 35” - 36” | 43" - 44" | 9 - 11 |
Large 12-13 | 35” - 36” | 43" - 44" | 12 - 13 |
XL 12-13 | 37” - 38” | 47" - 48" | 12 - 13 |
Made-to-order Long Inseam Custom Sizes - GORE-TEX® Waders Only. Upcharges apply. | |||
2XL 12-13*** | 37” - 38” | 51" - 52" | 12 - 13 |
NOTE: Sizes available vary by wader model.
*Crotch to floor - see Fit Tab
**Body measurements
***Available through our Custom Shop - please call (888) 585-3570
Men's Stockingfoot Pant Wader Size Chart
Simms Pant Wader Size |
Inseam* |
Waist |
Stockingfoot size |
S |
31" - 32" |
28”- 32” |
7 - 8 |
S King |
31" - 32" |
30” - 34” |
7 - 8 |
M |
33" - 34" |
32” - 36” |
9 - 11 |
M Short |
29” - 30” |
32” - 36” |
9 - 11 |
M King |
33" - 34" |
34” - 38” |
9 - 11 |
M Long |
35" - 36" |
32" - 36" |
9 - 11 |
L |
33" - 34" |
36" - 40" |
9 - 11 |
L Short |
31" - 32" |
36" - 40" |
9 - 11 |
L King |
33" - 34" |
38” - 42” |
9 - 11 |
L Long |
35" - 36" |
36" - 40" |
9 - 11 |
XL |
35" - 36" |
40” - 44” |
12 - 13 |
XL King |
35" - 36" |
42" - 46" |
12 - 13 |
XL Long |
37” - 38” |
40" - 44" |
12 - 13 |
2XL |
35" - 36" |
44" - 48" |
12 - 13 |
NOTE: Sizes available vary by wader model.
*Crotch to floor - see Fit Tab
**Body measurements
Brand | Simms Fishing Products |
EAN | 694264573655 |